KEYENCE KV Series - Manual (Page 228)

Appendices
2-204
Appendices
Appendix I List of Files Used
This appendix describes files generated when the Ladder Builder for KV is executed.
Files generated in the data directory
********.LDC Source file dedicated to the Ladder Builder
********.LDR Ladder diagram source file [usable by the KV IncrediWare (DOS)]
********.RCM Contact comment 1 file [usable by the KV IncrediWare (DOS)]
********.CM2 Contact comment 2 file
********.CM3 Contact comment 3 file
********.LVL Label file
********.ERR Error file [usable by the KV IncrediWare (DOS)]
********.MNM Mnemonic list file [usable by the KV IncrediWare (DOS)]
********.COD Code file [usable by the KV IncrediWare (DOS)]
********.KRE Registration monitor information file
********.KAL Monitor all information file
********.KDV Change all information file
********.INT Ladder diagram comment transfer range setting file
********.KEN MDI setting file
Files generated in the working directory
These files are automatically saved, and deleted when the software is closed nor-
mally.
********.$DC Ladder diagram source file
********.$CM Contact comment 1 file
********.$M2 Contact comment 2 file
********.$M3 Contact comment 3 file
********.$M3 Contact comment 3 file
********.$VL Device label file
Note: When a file with the extension shown above is edited or deleted by any
software other than the LADDER BUILDER for KV or the KV IncrediWare (DOS), it
may not work correctly.
KVSKA Appendix.P65 08.3.11, 11:26 AM 204