KEYENCE KV Series - Manual (Page 119)

Chapter 3 Simulator
2-95
1 3
Turning on/off bit devices
To turn on/off a bit device, perform the following procedure.
■ Turning on/off a bit device using the mouse
Place the cursor over the device to be turned on/off, and double-click it.
• The color of the contact changes to indicate that the ON/OFF status has been
toggled.
• When the mouse is used for operation, the cursor is selected as soon as it is
double-clicked.
■ Turning on/off a bit device using the keyboard
While the cursor is green, place the cursor in the device to be turned on/off using the
LEFT, RIGHT, UP and DOWN keys, and then press the space bar.
• The color of the contact changes to indicate that the ON/OFF status has been
toggled.
ON status
While the mouse is used While the cursor is manipulated
OFF status
While the mouse is used While the cursor is manipulated
Note 1: When the cursor is displayed in gray, all key operations are disabled on the
ladder monitor window. To move the cursor using the LEFT, RIGHT, UP and DOWN
keys or turn on/off a device using the space bar, press the Esc key once to change
the cursor back to green, and then perform the desired operation.
Note 2: Timer/counter contacts cannot be turned on/off.
0000 0000
0000 0000
KVSKA Chap 03.P65 08.3.11, 11:29 AM 95