KEYENCE KV Series - Manual (Page 114)

Chapter 3 Simulator
2-90
3
Ladder monitor window
• Use the scroll bar or the cursor control keys (LEFT/RIGHT/UP/DOWN) to look at
the hidden (undisplayed) portion.
• When a scan or step is executed, device values and the ON/OFF indication are
changed continuously according to the operation speed.
• When a step is executed, the current position is scrolled (only in the upper
window) according to the operation speed, and the cursor is moved in the line
executed. The mnemonic list window is displayed to indicate the step executed.
■ Moving the cursor
LEFT/RIGHT/UP/DOWN keys : Move the cursor in the corresponding
direction.
Pageup/PageDown keys : Move the cursor up or down one page
(screen).
Ctrl + UP/DOWN keys : Move the cursor by one block.
Home key : Move the cursor to the first line.
End key : Move the cursor to the last line.
■ When dividing the screen into two windows
When the pointer is placed between the bottom of the scroll bar and the window
frame, the pointer is changed into " ". (While the pointer shape is " ", the window
size can be changed but the screen cannot be divided.)
When the left button is pressed and held and moved upward in this status, the
screen is divided into the upper and lower windows. Different contents can be
displayed in each window. However, only the upper window is scrolled when a step
is executed. (The lower screen is not scrolled.)
To switch the active window between the upper and lower windows, click the mouse
on the desired window or press the Shift and F6 keys at the same time.
Cursor
Contact
Line No.
Step No.
Scroll bar
KVSKA Chap 03.P65 08.3.11, 11:29 AM 90