Functions of the ladder builder for kv – KEYENCE KV Series User Manual

Page 30

Advertising
background image

Chapter 1 Introduction

2-6

1

Functions of the Ladder Builder for KV

The following functions are provided in the Ladder Builder for KV.

■ Editor function
•

Creates the ladder diagram using diversified instruction words of the ladder
language.

•

Registers comments to contacts. Comments can be transferred to a Visual KV or
a KV-300 (Except for KV-10/80 Series).

•

Converts the ladder diagram into machine code.

•

Displays the ladder diagram, mnemonic list, label comment and device use
status list, etc., on the screen and prints them out to the printer

■ Simulator function
•

Simulates the operation of the ladder diagram even if a Visual KV or a conven-
tional KV is not connected, and allows debugging of the program.

•

Provides a continuous scan execution mode, one scan execution mode, one step
execution mode, etc. so that errors be confidently located.

•

Enables execution of a step in the reverse direction once or continuously.

■ Monitor function
•

Monitors the contact ON/OFF status on a real-time, on-line basis using the ladder
diagram created.

•

Displays the timing chart, and transfers programs to a Visual KV or a conven-
tional KV.

KVSKA Chap 01.P65

08.3.11, 11:27 AM

6

Advertising