KEYENCE KV Series - Manual (Page 99)

Chapter 2 Editor
2-75
1 2
2.12 Compilation
This section describes how to compile ladder programs created using the editor.
2.12.1 Executing compilation
Compile ➔ Compile (Ctrl + F9)
Ladder programs created using the editor cannot be transferred to a PLC. They
must be compiled into machine code.
To compile a ladder program, perform the following procedure.
1. Set the ladder diagram of the program to be compiled as the current window.
2. Select "Compile" from the "Compile" menu, or click the button.
The compilation process is performed.
3. When the program is correctly compiled, the message "Compilation successful."
is displayed. Click the [OK] button.
KVSKA Chap 02.P65 08.3.11, 11:29 AM 75