KEYENCE KV Series - Manual (Page 201)

Appendices
2-177
1
Appendices
DM9500 Slot number in which the error occurred
DM9501 Channel number within slot in which the error occurred
DM9507 to DM9517 I/O module connection information map
Set item Allowable setting range
DM9407 Preset value error code 11 to 7
DM9408 X-axis startup frequency (Hz) 153 to 50000
DM9409 X-axis operation frequency (Hz) 153 to 50000
DM9410 X-axis acceleration/deceleration time (ms) 0 to 4096
DM9411 X-axis output pulses (higher-order 16 bits) 0 to 65535
DM9412 X-axis output pulses (lower-order 16 bits) 2 to 65535
DM9413 Y-axis startup frequency (Hz) 153 to 50000
DM9414 Y-axis operation frequency (Hz) 153 to 50000
DM9415 Y-axis acceleration/deceleration time (ms) 0 to 4096
DM9416 Y-axis output pulses (higher-order 16 bits) 0 to 65535
DM9417 Y-axis output pulses (lower-order 16 bits) 2 to 65535
DM9600 First DM number that stores ASCII code
DM9601 First DM number to which converted BIN value is written
DM9602 First DM number to which converted ASCII code is written
DM9603 First DM number that stores BIN value
DM1485 X #65536 + DM1484
(output pulses)
DM1481
(operation)
Frequency (Hz)
DM1480
(startup)
0 DM1482 DM1482 Time (ms)
(acceleration time) (deceleration time)
■ I/O module error information (valid in the KV-300 only)
■ Data memory for motor drive (valid in the KV-300 only)
■ Data memory to convert ASCII character string into BIN value (32 bits)
■ Data memory to convert BIN value (32 bits) into ASCII character string
KVSKA Appendix.P65 08.3.11, 11:26 AM 177