KEYENCE KV Series - Manual (Page 176)

Chapter 4 Monitor
2-152
4
3. Specify the folder (directory) and file name to which data is to be saved.
Note: When data is already saved in a file and you want to save new data with the
same file name, select "Save" from the "File" menu. If you do this, the original data
will be erased because the existing file is overwritten by the new file.
■ How to print out device contents lists
To print out device contents, perform the following procedure.
1. Specify the device range to be printed out in the change all window. Click the
[File Read] button.
The "Save" dialog box is displayed. Enter the file name.
2. Read the change all text file (*.txt) saved in step 1 that is to be printed out using
the Windows memo, editor or word processor software.
(The file is saved in text format. Be sure to select text format when opening the
file in the word processor software.)
3. Print out the file from the software used to read the file.
• A device list is printed out.
Folder (directory) Select the folder (directory) in which the file is to be saved.
The current folder (directory) is selected as the default.
File Name Enter the file name using up to 8 letters and numbers.
The extension is set to "kdv", and should not be changed.
KVSKA Chap 04.P65 08.3.11, 11:30 AM 152