KEYENCE KV Series - Manual (Page 95)

Chapter 2 Editor
2-71
1 2
2.10 Setting the System
This section describes how to set the directory used for the auto save function, and
how to select the decompilation error check.
2.10.1 Setting the system
Edit ➔ System Settings
To set the directory used for the auto save function and to select the decompilation
error check, perform the following procedure.
1. Select "System Settings" from the "Edit" menu.
The "System Settings" dialog box is displayed.
■ When setting the work directory used for the automatic save function
Specify the directory (folder) used for the automatic save function as "Work
Directory" using a full path.
■ When selecting the decompilation error check
Click the "Code Check" check box to add a check mark. Decompilation errors will
then be automatically checked when a ladder program is compiled.
If an error is detected, the message "Reverse Compile Error" is displayed when
compilation is complete.
➮ H.3 Programs which cannot be decomplied (Appendices p. 2-203)
The code check is specified by default.
When the deconversion error check is not required, delete the check mark.
Note: When the code check is specified, the compilation time is longer because a
program in which errors will be detected during decompilation and whose transfer
will be aborted is checked while the program is transferred from the KV main body to
the personal computer.
KVSKA Chap 02.P65 08.3.11, 11:28 AM 71