KEYENCE KV Series - Manual (Page 197)

Appendices
2-173
1
Appendices
DM1485 X #65536 + DM1484
(output pulses)
DM1481
(operation)
Frequency (Hz)
DM1480
(startup)
0 DM1482 DM1482 Time (ms)
(acceleration time) (deceleration time)
Setting contents Setting range
DM1480 Ramp up-and-down control startup frequency (Hz) 200 to 50000
DM1481 Ramp up-and-down control operating frequency (Hz) 200 to 50000
(value larger than
startup frequency)
DM1482 Ramp up-and-down control acceleration/deceleration 0 to 4000
time (ms)
DM1484 Number of output pulses (lower 16 bits) 0 to 65535
(2 or more when
DM1485 is 0)
DM1485 Number of output pulses (upper 16 bits) 0 to 65535
DM1486 Set value error code When an error
occurs, a
corresponding error
code 11 to 17 is
stored.
■ Data memories for motor drive
KVSKA Appendix.P65 08.3.11, 11:26 AM 173