KEYENCE KV Series - Manual (Page 80)

Chapter 2 Editor
2-56
2
3. Perform any of the following operations.
•
Select "Paste" from the "Edit" menu on the tool bar, or select "Paste" from the
shortcut menu displayed by right-clicking.
• Click the button.
• While pressing and holding the Ctrl key, press the V key.
• While pressing and holding the Shift key, press Insert key.
The selected range is pasted.
Note 1: The cut portion is temporarily copied to the cut buffer. Accordingly, even if
the portion is cut to be deleted, the cut portion can be pasted again by performing
step 3 above.
Note 2: When the number of cells copied is larger than the paste destination space,
the message "Can’t write at current position." is displayed, and the cells equivalent
to only the paste destination space are pasted. The remaining cells are not pasted.
KVSKA Chap 02.P65 08.3.11, 11:28 AM 56