KEYENCE KV Series - Manual (Page 133)

Chapter 3 Simulator
2-109
1 3
3.4 Monitor All
Monitor all displays the current value of all devices, the ON/OFF status of contacts,
and registered comments for each device type. This section describes the opera-
tions available in monitor all.
3.4.1 Outline of monitor all
Monitor all offers the following functions.
• Displays the current value and preset value of all devices, and the ON/OFF
status of the contacts and coils for each device type.
• Displays all the registered comments.
• Turns on/off bit devices.
• Changes the current value, etc. using the dialog bar.
• Sets the break condition.
• Sets the scan time.
• Sets the watch dog timer.
3.4.2 Displaying, saving, and reading the monitor all window
To display the monitor all window, a device must be selected on the ladder monitor
window. The contents registered to the monitor all window can be saved in a file for
each device type, to be read at a later time.
Displaying the monitor all window
File ➔ Monitor All
The method for displaying the monitor all window is different depending on whether
you are opening a new window or changing the contents of a currently open window.
■ When displaying a new window
To display the monitor all window for the first time or to display it in another window,
perform the following procedure.
1. On the ladder monitor window, select the device to be displayed.
When a device is clicked, its color is changed to indicate that it is selected.
KVSKA Chap 03.P65 08.3.11, 11:29 AM 109