KEYENCE KV Series - Manual (Page 57)

Chapter 2 Editor
2-33
1 2
Reading files
File ➔ Open
When editing an existing file, select and read the file to be edited.
1. Select "Open" from the "File" menu.
The "Open" dialog box is displayed.
2. Specify the folder (directory) in which the file to be read is saved, and select the
file name.
3. Click the [OK] button.
The specified file is read, and the ladder program window is open.
2.3.5 Reading and saving a file in another format
This section describes the method used to save and read files in any format other
than the "ldr" format such as mnemonic list files, comments in other files, comment
files in text format, etc.
Note: This function can only be selected while the ladder program window is se-
lected. Display the ladder program window by selecting "New" from the "File" menu,
and then select "Other Format".
Saving and reading a mnemonic list
File ➔ Other Format ➔ Save Mnemonic List, File ➔ Other Format ➔ Read Mnemonic List
The ladder program being created can be saved as a mnemonic list (text format).
Saved mnemonic lists (text format) can also be read.
Specify the desired mnemonic list file in the "Save As" or "Open" dialog box.
Note: When read is executed, the specified mnemonic list file is read on the current
window. In this case, the ladder program in the current window is erased. When the
ladder program on the current window is required, be sure to save it in a file before
reading the mnemonic list.
■ File name of a mnemonic list
A mnemonic list file adopts the normal text format.
The extension of a mnemonic file is "mnm".
Folder (directory) Select the folder (directory) in which the file to be read is saved.
The current folder (directory) is selected by default.
File Name Specify the file name to be read. The extension is "ldr".
File Type "Ladder diagram (*.ldr)" is selected. Do not change this setting.
KVSKA Chap 02.P65 08.3.11, 11:28 AM 33