KEYENCE KV Series - Manual (Page 139)

Chapter 3 Simulator
2-115
1 3
3. Release the left button (drop).
• In the monitor all window, a list of devices with an equivalent type to the selected
device is displayed.
The line of the selected device is highlighted to indicate that it is selected.
Registering a device by specifying it using the dialog bar
The dialog bar is a tool shared by the ladder monitor window, the monitor all window
and the registration monitor window. It allows you to register new devices and
change the setting of the selected device.
The following items can be set using the dialog bar.
• Device type
• Device No.
• Bit count
• Radix
• Comment display method *1.
• Current value
• Preset value (in a timer/counter exclusively)
*1. It is not displayed while the ladder monitor window is active.
➮ Changing the current value/preset value/attribute: Note (p. 2-96)
1. When registering a device, first perform the following procedure.
■ When the registration destination window is not open
Specify the device to be registered using the dialog bar, and then select the monitor
to which the device is to be registered.
■ When the registration destination window is open
Set the monitor window to which a device is to be registered as the current window,
and then set the device to be registered using the dialog bar.
KVSKA Chap 03.P65 08.3.11, 11:29 AM 115