KEYENCE KV Series - Manual (Page 83)

Chapter 2 Editor
2-59
1 2
Jump to the first/last line
Edit ➔ Jump ➔ Top (Ctrl + Home)
➔ Bottom (Ctrl + End)
To jump to the first line or the last line of a ladder diagram, perform the following
procedure.
■ When jumping to the first line
Select "Edit", "Jump" and "Top" from the menu.
■ When jumping to the last line
Select "Edit", "Jump" and "Bottom " from the menu.
Jump to the registered line
Edit ➔ Jump ➔ Line Registration (Ctrl + L)
➔ Registered Line (Ctrl + J)
The desired lines can be temporarily registered together with comments, and the
edit control can be jumped by specifying the jump destination from the registered
line list.
This function is useful when a jump to the same line is performed many times or
when the line number does not help you recognize the line.
■ Registering lines
Register lines using the following procedure.
1. Place the cursor in the line to be registered.
2. Select "Edit", "Jump" and "Line Registration" from the menu.
The "Line Registration" dialog box is displayed.
3. Enter the desired comment for the line to be registered into "Comment" if neces-
sary.
When registering the same comment for another line, change "Line No." to the
line number to be registered.
Up to 70 characters can be entered.
KVSKA Chap 02.P65 08.3.11, 11:28 AM 59