KEYENCE KV Series - Manual (Page 79)

Chapter 2 Editor
2-55
1 2
■ When moving/deleting data
Perform any of the following operations.
• Select "Cut" from the "Edit" menu on the tool bar, or select "Cut" from the short-
cut menu displayed by right-clicking.
• Click the button.
• While pressing and holding the Ctrl key, press the X key.
2. Perform the following procedure when copying or moving data.
■ When pasting data to a ladder diagram
Place the mouse pointer in the copy destination or the move destination, then click
it. You can also move the cursor to the copy destination or the move destination
using the LEFT, RIGHT, UP and DOWN keys.
KVSKA Chap 02.P65 08.3.11, 11:28 AM 55