KEYENCE KV Series - Manual (Page 166)

Chapter 4 Monitor
2-142
4
Editing devices in offline mode
File ➔ Monitor ➔ Edit Offline Device
Specified devices can be read all at once from the PLC by specifying the range, and
then can be edited.
1. Select "File", "Monitor" and "Edit Offline Device" from the editor menu.
• The monitor is started up in the device setting mode.
2. Select "Change All" from the monitor’s "File" menu
• The change all window is opened.
➮ Refer to "4.6.2 Changing the current values all at once " (p. 2-150).
Note: When the monitor is started up in the device setting mode, the ladder monitor,
registration monitor and monitor all cannot be opened.
Exit procedure
File ➔ Editor
You can exit from the monitor and return to the editor.
When switching to the monitor again using the same program, select "File", "Moni-
tor" and "Compile _ Transfer _ Monitor" from the editor menu.
• When the program is the same as that saved in the PLC, the monitor is selected
again without transferring the program.
Select "Editor" from the "File" menu, or click the button.
Note: The Ladder Builder for KV itself cannot be terminated directly from the moni-
tor. To exit from the Ladder Builder for KV, return to the editor, and then select "Exit"
from the editor’s "File" menu.
KVSKA Chap 04.P65 08.3.11, 11:30 AM 142