KEYENCE KV Series - Manual (Page 42)

Chapter 1 Introduction
2-18
1
Check mark
Tool bar
Dialog bar
Status bar
Showing/hiding the tool bar, status bar and dialog bar
The display status of the tool bar, status bar and dialog bar can be changed.
Select "View" from the editor’s menu bar.
When the check mark is visible: Show mode
When the check mark is not visible: Hide mode
A check mark appears before each bar by default. Every time the check mark is
clicked, the display status is toggled between show mode and hide mode.
* The dialog bar is not provided in the editor.
Display mode
The screen display can be viewed in 5 different sizes.
In the editor, you can set whether or not labels and comments are displayed for
each screen.
■ Changing the display size
Five different sizes are available to display the ladder diagram. When the software is
started up, "100%" is selected by default. Use the following method to change the
display size. (In the editor, size can be set in the "Display Mode Setup" dialog box.)
View ➔ Zoom In Ctrl + PageDown keys: Selects a higher mode.
View ➔ Zoom Out Ctrl + PageUp keys: Selects a lower mode.
■ Changing the display size (only in the editor)
The display size can be set in the "Display Mode Setup" dialog box using the follow-
ing procedure.
1. Select "Display Mode" from the "View" menu on the editor’s menu bar, or click
the button.
The "Display Mode Setup" dialog box is displayed.
KVSKA Chap 01.P65 08.3.11, 11:27 AM 18