KEYENCE KV Series - Manual (Page 75)

Chapter 2 Editor
2-51
1 2
2.5.3 Changing ladder lines into comments
Comment ➔ Change Ladder Line into Comment ➔ Settings (Ctrl + Q) ★ Right-click
➔ Change Ladder Line into Comment ➔ Cancel (Ctrl + W) ★ Right-click
When you specify a ladder line to be treated as a comment, only this specified
portion is ignored during conversion. Set this function temporarily when you do not
want a certain portion to be converted.
To set ladder lines to be changed into comments or to reverse this setting, perform
the following procedure.
1. Select the range of the ladder lines to be changed into comments or for which the
setting is to be reversed.
➮ Selecting the range (p.2-52)
2. To set the line range to be changed into comments, select "Comment", "Change
Ladder Line into Comment and Settings Ctrl + Q" from the menu or right-click
menu. To cancel the setting, select "Cancel Ctrl + W" from the submenu.
3. The selected line range is changed into comments.
When the setting is canceled, the specified range can be converted.
Note 1: The ladder lines set to be changed into comments cannot be transferred to
the PLC. Accordingly, the ladder lines set to be changed into comments are not
included in a program read from the PLC.
Note 2: The ladder lines set to be changed into comments cannot be read by the KV
IncrediWare (DOS). Accordingly, when a program is read by the KV IncrediWare
(DOS) and saved with the same name, the ladder lines set to be changed into
comments are deleted.
KVSKA Chap 02.P65 08.3.11, 11:28 AM 51