KEYENCE KV Series - Manual (Page 62)

Chapter 2 Editor
2-38
2
Entering symbols by selection
Edit ➔ Symbol Input ➔ Symbol Selective Input (Tab)
When the desired instruction word type is selected on the "Enter Instruction Word"
window, instruction codes available for the selected instruction word can be selected
from the list. As well, a device can be specified for each operand. If you are not
familiar with creation of ladder programs and handling of instruction words, it is
recommended that you enter symbols from the "Enter Instruction Word" window to
ensure they are correct.
To open the "Enter Instruction Word" window, select "Edit", "Symbol Input" and
"Symbol Selective Input" from the menu. In addition, the following two methods are
also available. These two methods offer quicker operation.
Place the mouse cursor in the cell in the ladder diagram to which an instruction word
is to be entered, and double-click it.
Select the desired cell using the LEFT, RIGHT, UP and DOWN keys, and then press
the Tab key.
Note: When an instruction word has already been entered in the selected cell, it is
opened in the edit mode.
■ Setting the "Enter Instruction Word" window
Radio button
Sequence selection
KVSKA Chap 02.P65 08.3.11, 11:28 AM 38