KEYENCE KV Series - Manual (Page 210)

Appendices
2-186
Appendices
■ Shortcut key list [ ] indicates the space bar.
● File
New [Ctrl] + [N]
Open [Ctrl] + [O]
Save [Ctrl] + [S]
Print [Ctrl] + [P]
PLC Monitor [Ctrl] + [F1]
Convert → Transfer → Monitor [Ctrl] + [F8]
Simulator [Ctrl] + [F2]
● Edit
Undo [Ctrl] + [Z]
Redo [Ctrl] + [Y]
Symbol Selective Input [Tab]
Symbol Direct Input [ENTER] (Mnemonic can be entered.)
Delete Symbol [ ]
[BackSpace]
[Delete]
a (N.O.) Contact Input [F5]
b (N.C.) Contact Input [Shift] + [F5]
a (N.O.) Contact OR Input [F4]
b (N.C.) Contact OR Input [Shift] + [F4]
Coil Input [F7]
b (N.C.) Contact Coil Input [Shift] + [F7]
Vertical Connection Line [F8], [ / ]
Horizontal Connection Line [F9], [ – ]
Horizontal Connection Line to End of Line [Ctrl] + [Tab]
Delete Vertical Connection Line [Shift] + [F8]
Delete Horizontal Connection Line [Shift] + [F9]
Macro Input → Develop [Shift] + [F1]
Range selection [Shift] + [UP][DOWN][LEFT][RIGHT]
Cut [Ctrl] + [X]
[Ctrl] + [Delete]
Copy [Ctrl] + [C]
[Ctrl] + [Insert]
Paste Ctrl] + [V]
[Shift] + [Insert]
Insert Empty Line [Shift] + [ENTER]
Delete Line [Shift] + [Delete]
Edit Connection Line [Ctrl] + [K], [\]
Change Device at Cursor Position [Esc]
Edit List [Ctrl] + [F3]
KVSKA Appendix.P65 08.3.11, 11:26 AM 186