KEYENCE KV Series - Manual (Page 73)

Chapter 2 Editor
2-49
1 2
■ When moving a comment block from other devices
Perform steps 1 to 7 described above. However, click the [Cut] button instead of the
[Copy] button in step 4.
Using this procedure, the comment block of the selected devices can be moved.
■ When deleting a comment block from other devices
Perform steps 1 to 4. However, click the [Cut] button in step 4.
Using this procedure, the comment block of the selected devices can be deleted.
Making changes directly in the ladder diagram
Comment ➔ Change Label Name of Current Device (Ctrl + B)
➔ Change Comment of Current Device (Ctrl + M)
Perform the following procedure when entering a label name or comment in the
ladder diagram.
1. Place the cursor in the device to be entered.
2. When entering a label name, select "Change Label Name of Current Device Ctrl
+ B" from the "Comment" menu.
When entering a comment, select "Change Comment Name of Current Device
Ctrl + M" from the "Comment" menu.
The "Change Label" or "Change Comment X" dialog box is displayed.
The dialog box name in which comments can be changed varies depending on
the comment type selected in "Comment Type" in "Display Mode".
When a label name or comment has already been registered in the device, the
registered character string is displayed.
3. Enter the desired character string.
The comment selected in "Comment Type" in "Display Mode" can be entered.
➮ Display mode (p. 2-19)
4. The displayed character string is entered when the [OK] button is clicked.
To cancel the input, click the [Cancel] button.
* Example: When "Comment 2" is displayed in "Comment Type"
KVSKA Chap 02.P65 08.3.11, 11:28 AM 49