ADLINK PCI-8158 - Manual (Page 100)

90 MotionCreatorPro
5.3.4 Configuration Menu
In this menu, you can configure ALM, INP, ERC, EL, ORG, and
EZ.
1. ALM Logic and Response mode: Select logic and
response modes of ALM signal. The related function call
is _8158_set_alm().
2. INP Logic and Enable/Disable selection: Select logic,
and Enable/ Disable the INP signal. The related function
call is _8158_set_inp()
3. ERC Logic and Active timing: Select the Logic and
Active timing of the ERC signal. The related function call
is _8158_set_erc().
4. EL Response mode: Select the response mode of the
EL signal. The related function call is
_8158_set_limit_logic ().