ADLINK PCI-8158 - Manual (Page 31)

Signal Connections 21
Table 3-2: Pulse Output Signals OUT (P2)
The output of the OUT or DIR signals can be configured by jump-
ers as either differential line drivers or open collector output. Users
can select the output mode either by jumper wiring between 1 and
2 or 2 and 3 of jumpers J1-J16 as follows:
P2 Pin No. Signal Name Description Axis #
3 OUT4+ Pulse signals (+) 4
4 OUT4- Pulse signals (-) 4
5 DIR4+ Direction signal (+) 4
6 DIR4- Direction signal (-) 4
21 OUT5+ Pulse signals (+) 5
22 OUT5- Pulse signals (-) 5
23 DIR5+ Direction signal (+) 5
24 DIR5- Direction signal (-) 5
53 OUT6+ Pulse signals (+) 6
54 OUT6- Pulse signals (-) 6
55 DIR6+ Direction signal (+) 6
56 DIR6- Direction signal (-) 6
71 OUT7+ Pulse signals (+) 7
72 OUT7- Pulse signals (-) 7
73 DIR7+ Direction signal (+) 7
74 DIR7- Direction signal (-) 7
Output
Signal
For differential line driver output,
close breaks between 1 and 2 of:
For open collector output, close
breaks between 2 and 3 of:
OUT0+ J1 J1
DIR0+ J9 J9
OUT1+ J2 J2
DIR1+ J10 J10
OUT2+ J3 J3
DIR2+ J11 J11
OUT3+ J4 J4