ADLINK PCI-8158 - Manual (Page 119)

MotionCreatorPro 109
After setting these parameters, you can enter the arc center
and degree in “Play Key Frame”. Click Run button to start cir-
cular interpolation motion.
Z
Jog Type: Continuous Jog
Continuous Jog means that when you press one directional
button, the axis will continuously move with an increasing
speed. The longer you press, the faster it runs. When you un-
press the button, the axis will stop immediately.
Z
Incremental Jog: Incremental jog means that when you
click one directional button, the axis will step a distance
according to the Step-Size’s setting.
15.Motion status: Displays the returned value of the
_8158_motion_done function. The related function is
_8158_motion_done().
16.Play Key:
X
Play button: Clicking this button will cause the 8158 start to
outlet pulses according to previous setting.
Z
In “Linear Mode,” it causes the axis to move to Distance.
The related function is _8158_start_tr_move_xy,
_8158_start_sr_move_xy.
Z
In “Circular Mode,” it causes the axis to move to Dis-
tance(By Pos/Dist(pulse)).The related function is
_8158_start_tr_arc_xy, _8158_start_sr_arc_xy.