ADLINK PCI-8158 - Manual (Page 134)

124 Function Library
This function is used to verify the security code which the user
set by the function “_8158_set_security_key”.
See also: _8158_set_security_key, _8158_reset_security_key
_8158_reset_security_key:
By this function, Users can reset the security code on the PCI
card to default value. The default security code is 0.
See also: _8158_check_security_key, _8158_set_security_key
_8158_config_from_file:
This function is used to load the configuration of the PCI-8158
according to specified file. By using MotionCreatorPro, user
could test and configure the 8158 correctly. After saving the
configuration, the file would be existed in user’s system direc-
tory as 8158.ini.
When this function is executed, all 8158 cards in the system
will be configured as the following functions were called
according to parameters recorded in 8158.ini.
_8158_set_limit_logic
_8158_set_pcs_logic
_8158_set_ltc_logic
_8158_set_inp
_8158_set_erc
_8158_set_alm
_8158_set_pls_iptmode
_8158_set_pls_outmode
_8158_set_move_ratio
_8158_set_latch_source
_8158_set_feedback_src
_8158_set_home_config
_8158_set_soft_limit
_8158_set_fa_speed
_8158_set_sd