ADLINK PCI-8158 - Manual (Page 102)

92 MotionCreatorPro
In this menu, you can configure LTC, SD, PCS, and Select_Input.
1. LTC Logic: Select the logic of the LTC signal. The
related function call is _8158_set_ltc_logic().
2. LTC latch_source: Select the logic of the latch_source
signal. The related function call is
_8158_set_latch_source ().
3. SD Configuration: Configure the SD signal. The related
function call is _8158_set_sd().
4. PCS Logic: Select the logic of the SelectNo signal. The
related function call is _8158_set_pcs_logic().
5. Set gpio input: Select the configurations of the gpio
input. The related function call is
_8158_set_gpio_input_function.
6. Gpio Logic: Select the logic of the gpio. The related