ADLINK PCI-8158 - Manual (Page 42)

32 Signal Connections
3.8 General-purpose Signal SVON
The SVON signal can be used as a servomotor-on control or gen-
eral purpose output signal. The signal names, pin numbers, and
its axis numbers are shown in the following table:
The output circuit for the SVON signal is shown below:
P1 Pin No Signal Name Axis #
7 SVON0 0
25 SVON1 1
57 SVON2 2
75 SVON3 3
P2 Pin No Signal Name Axis #
7 SVON4 4
25 SVON5 5
57 SVON6 6
75 SVON7 7