ADLINK PCI-8158 User Manual
Page 104
Advertising
94
MotionCreatorPro
In this menu, you can configure pulse input/output and move ratio
and INT factor.
1. Pulse Output Mode: Select the output mode of the
pulse signal (OUT/ DIR). The related function call is
_8158_set_pls_outmode().
2. Pulse Input: Sets the configurations of the Pulse input
signal(EA/EB). The related function calls are
_8158_set_pls_iptmode(), _8158_set_feedback_src().
3. INT Factor: Select factors to initiate the event int. The
related function call is _8158_set_int_factor().
4. Buttons:
Z
Next Card: Change operating card.
Z
Next Axis: Change operating axis.
Z
Save Config: Save current configuration to 8158.ini And
8158MC.ini.
Z
Close: Close the menu.
Advertising