ADLINK PCI-8158 - Manual (Page 105)

MotionCreatorPro 95
5.3.5 Single Axis Operation Menu
In this menu, you can change the settings a selected axis, includ-
ing velocity mode motion, preset relative/absolute motion, manual
pulse move, and home return.
1. Position:
Z
Command: displays the value of the command counter.
The related function is _8158_get_command().
Z Feedback: displays the value of the feedback position
counter. The related function is _8158_get_position()
Z
Pos Error: displays the value of the position error
counter. The related function is
_8158_get_error_counter().
Z
Target Pos: displays the value of the target position
recorder. The related function is