Doremi IMS1000 - Manual (Page 119)

IMS.OM.002949.DRM Page 119 of 320 Version 1.7
Doremi Labs
Figure 130: eCNA Added
12.3.3.1 Removing an eCNA Device
 To remove the eCNA device, select it in the Device Manager GUI and click the Delete
Device button (Figure 129).
12.3.4 Adding a JNior Device
 To add the JNior device, click the New button in the Device Manager window (Figure
126).
 The New Device drop-down window will appear. Select JNior.
 The Device Manager GUI will be updated to reflect the addition of the JNior device.
 Input the JNior Server IP address in the appropriate field (Figure 131).
 The port number field will already contain the appropriate value (factory default value).
Note: The JNior device documentation will provide the correct username and password (factory
default values).
 Click the Save button to record the settings. A window will appear asking for a password.
Enter the password to proceed. Clicking the Revert button prior to saving will delete the
unsaved information (Figure 129).
Enabled
Check
Box
IP
Address