Doremi IMS1000 - Manual (Page 284)

IMS.OM.002949.DRM Page 284 of 320 Version 1.7
Doremi Labs
SPU: 0 0 Spurious interrupts
...
If the report was taken while the error was showing, look at 'cat /proc/dolphin0' in drmreport.txt.
If the report was taken after a reboot, look at 'cat /proc/dolphin0' in \doremi\log\kreport.log.x
(kreport.log being the previous boot, kreport.log.0 being the boot before, and so on). VID_IFR
register should be at value 00000001 when this issue occurs:
Exec. command: 'cat /proc/dolphin0'
*****************************************************
* *
* Doremi Labs, Inc. *
* *
* PCI Driver for the Dolphin card *
* *
*****************************************************
--- Dolphin registers ---
GPI: 00000000
GPO: 00000000
AUD_CFG: 0060106A
AUD_MAP0: 76543210
...
VID_CFG: 007074C0
VID_IER: 00000701
VID_IFR: 00000001
VID_CTRL: 00000000
AES_CONTROL: 00000004
AES_SIZE: 00000000
...
17.8.1.3 Solution
Install firmware version 4.2.7 or higher.
17.8.2 Sudden Interruption Mid-Playback
17.8.2.1 Description
Playback will be running fine and is suddenly stuck, the image and time code are frozen, or
there is
no decoder crash or underflow.
17.8.2.2 Identification
The issue looks similar to the previous one but the interrupt count in 'cat /proc/interrupts' is not
0.
When looking at \doremi\doremi\log\odetics.log (or \doremi\doremi\log\odetics.log.x depending
on the date of occurrence), there should be the following timeout messages when the issue
occurs:
[Tue Nov 19 18:32:00 2013][INFO ]: Loading CPL 'cd02617a-6361-4ed7-96d4-e9e6d7acfc1c' in
slot '1'...