Doremi IMS1000 - Manual (Page 20)

IMS.OM.002949.DRM Page 20 of 320 Version 1.7
Doremi Labs
WARNING
THIS DEVICE MUST BE GROUNDED.
IMPORTANT
Power requirements for electrical equipment vary from area to area. Please ensure that the
IMS1000 meets the power requirements in the surrounding area. If in doubt, consult a qualified
electrician or a Doremi Labs dealer.
IMS1000 Power Ratings
 The IMS1000 Maximum Power Consumption is up to 53W in playback 400Mbps with
three external USB devices attached that can draw 5V/0.5A from the IMS1000 USB
ports.
WARNING: Multiple sources of supply; disconnect all sources before servicing.
IMS1000 Rack Mount and Thermal Information

Maximum operating ambient temperature is 40°C.
 Never restrict the air flow through the devices’ fan or vents.
Protecting Yourself and the IMS1000
Never touch the AC plug with wet hands. Always disconnect the projector from the power supply
by pulling on the plug, not the cord. Allow only a Doremi Labs, Inc. dealer or qualified
professional engineer to repair or reassemble the IMS1000. Apart from voiding the warranty,
unauthorized engineers may touch live internal parts and receive a serious electric shock. Do
not put or allow anyone to put any object, especially metal objects, into the IMS1000. Use only
an AC power supply. Never use a DC power supply.
If water or any other liquid is spilled into or onto the IMS1000, disconnect the power and call a
Doremi dealer. The unit must be well ventilated and away from direct sunlight. To avoid damage
to internal circuitry, as well as the external finish, keep the IMS1000 away from direct sources of
heat (heater vents, stoves, radiators). Avoid using flammable aerosols near the IMS1000. They
can damage the surface area and may ignite. Do not use denatured alcohol, paint thinner, or
similar chemicals to clean the IMS1000. This can damage the unit.
Modification of this equipment is dangerous and can result in the impairment of the functions of
the IMS1000. Never attempt to modify the equipment in any way. In order to ensure optimum
performance of the IMS1000, select the setup location carefully and make sure the equipment is
used properly. Avoid setting up the IMS1000 in the following locations:
 In a humid or dusty environment.
 In a room with poor ventilation.