Showplaylist errors, Playlist will not load after reboot or power cycle, Description – Doremi IMS1000 User Manual

Page 283: Identification, 8 showplaylist errors

Advertising
background image

IMS.OM.002949.DRM

Page 283 of 320

Version 1.7

Doremi Labs

Reboot unit

17.8 ShowPlaylist Errors

If there is a problem with playback, it can be attributed to one of five issues. This section lists
and describes the five solutions for playback issues.

17.8.1 Playlist Will Not Load After Reboot or Power Cycle

17.8.1.1

Description

The following error message will show in Cinelister:

“Show Playlist Error; Could not load the

Show Playlist; Reason Unknown error 0.”

17.8.1.2

Identification

When looking at \doremi\doremi\log\odetics.log (or \doremi\doremi\log\odetics.log.x depending
on the date of occurrence), there should be the following timeout messages when the issue
occurs:

[Mon Sep 30 19:13:14 2013][INFO ]: Loading CPL 'e5ded2d0-d646-41a4-b8c4-32fe88fd527f' in
slot '1'...
[Mon Sep 30 19:13:14 2013][INFO ]: Accept KDM '06dbadf0-ed11-4fad-b9d1-196e974801a0'
for CPL 'e5ded2d0-d646-41a4-b8c4-32fe88fd527f'.
[Mon Sep 30 19:13:14 2013][INFO ]: CPL 'e5ded2d0-d646-41a4-b8c4-32fe88fd527f'
successfully loaded
dolphin_video_context_set_state_sync()::pthread_cond_timedwait(): timeout expired!
dolphin_video_context_set_state_sync()::pthread_cond_timedwait(): timeout expired!
dolphin_video_context_set_state_sync()::pthread_cond_timedwait(): timeout expired!
dolphin_video_context_set_state_sync()::pthread_cond_timedwait(): timeout expired!
dolphin_video_context_set_state_sync()::pthread_cond_timedwait(): timeout expired!
dolphin_video_context_set_state_sync(): Too many errors. Exiting...
[Mon Sep 30 19:13:26 2013][ERROR]: Can't set context to 'DolphinContextPaused'!

If the report was taken while the error was present, look at 'cat /proc/interrupts' in drmreport.txt.
If the report was taken after a reboot, look at 'cat /proc/interrupts' in \doremi\log\kreport.log.x
(kreport.log being the previous boot, kreport.log.0 being the boot before, and so on). Interrupt
count should stay at 0 for dolphin module when this issue occurs.

Exec. command: 'cat /proc/interrupts'
CPU0 CPU1
0: 62 0 IO-APIC-edge timer
9: 0 0 IO-APIC-fasteoi acpi
24: 1 0 IO-APIC-fasteoi pvrsrvkm
25: 6 0 IO-APIC-fasteoi parse_encode_isr
26: 11 0 IO-APIC-fasteoi decode_mux_isr
...
47: 0 0 IO-APIC-fasteoi ahci
64: 8944 0 PCI-MSI-edge ahci
65: 0 0 PCI-MSI-edge dolphin
NMI: 0 0 Non-maskable interrupts
LOC: 168013 167851 Local timer interrupts

Advertising