Doremi IMS1000 - Manual (Page 53)

IMS.OM.002949.DRM Page 53 of 320 Version 1.7
Doremi Labs
5 Installation and Marriage with a Barco Series-2
Projector

Before you begin to install the IMS1000 into your projector, be sure that:
o The projector is powered down and in the off position.
o Disconnect the AC power cord from the wall.
o Remember to always follow ESD procedures.
5.1 Preparation
Figure 42: Barco Projector

Remove the blank cover of the media block slot by unscrewing the two screws on the
sides (Figure 43).