Doremi IMS1000 - Manual (Page 68)

IMS.OM.002949.DRM Page 68 of 320 Version 1.7
Doremi Labs
Figure 68: IMS100 Installation
6.2 HDDs

HDDs are to be shipped out of their chassis. Upon initial installation, insert them into the
IMS1000 HDDs chassis carrier prior to powering up the projector.

Do not insert or remove HDDs if the unit is powered on.

HDDs are to be of the same make and model and have the same capacity.

Doremi prohibits mixing SATA I drives with SATA II drives within the same RAID.

Each one of the three HDDs that come with the IMS1000 will be labeled with a 1, 2, or 3.

The HDD labeled 1 is to be inserted into the left hand HDD slot, labeled HDD-1, on the
IMS1000.

The HDD labeled 2 is to be inserted into the middle HDD slot, labeled HDD-2, on the
IMS1000.

The HDD labeled 3 is to be inserted into the right hand HDD slot, labeled HDD-3, on the
IMS1000.

Each HDD has a silver latch mechanism that allows for unlatching of the drive from the
hard drive cage (Figure 69).
Two
Latches