Doremi IMS1000 - Manual (Page 78)

IMS.OM.002949.DRM Page 78 of 320 Version 1.7
Doremi Labs
6.9 Marriage
Once the projector and board have finished booting up, the lights on the side of the projector will
be red and green, indicating that the board and the projector are not married. The touch panel
controller attached to the projector will show a second error window, indicating that the marriage
has not occurred (Figure 86). Press the Acknowledge button.
Figure 86: Error Window

Go to Menu → Service Setup → IMB Marriage (Figure 87).
Figure 87: IMB Marriage

The marriage wizard, on the touch panel controller, will then guide you through the steps
necessary to complete the marriage. Click the Next button to begin (Figure 88).
IMB
Marriage
Acknowledge
Button