Ip | interface – Comtech EF Data CDM-570 User Manual

Page 243

Advertising
background image

CDM-570/570L Satellite Modem with Optional IP Module

Revision 12

Ethernet IP Module Interface

MN/CDM570L.IOM

13–37

13.6.2.4 IP Pages

Click the Interface, Routes, Multicast, QoS Mode, QoS, ARP, VLAN, IGMP, or
Redundancy hyperlink to continue.

13.6.2.4.1 IP | Interface


Figure 13-17. IP | Interface page

Use this page to view the MAC address, set the IP address and mask of the IP Module, and define
parameters for Brouter (Bridge + Router Traffic) Working Mode operation.

Ethernet (LAN)

MAC Address (read-only) – This is set at the factory to a guaranteed unique address that

cannot be modified.

Mode & Speed – Use the drop-down menu to select Auto, 10 Mbps Half Duplex, 100

Mbps Half Duplex, 10 Mbps Full Duplex, or 100 Mbps Full Duplex.

IP Address/Mask – Enter the IP Address/Mask for the IP Module Ethernet Interface.

Link Status (read-only) – This is the actual negotiated Link Status of the Ethernet Port; this

includes whether the link is UP or DOWN.

Managed Switch Mode

The Gateway IP Address may be entered when Managed Switch Mode is active.

Advertising
This manual is related to the following products: