Comtech EF Data CDM-570 - Manual (Page 496)

CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Appendix L MN/CDM570L.IOM
L–4
L.3.3 SELECT: (Main) Menu
SELECT: Config Monitor
Test Info Save/Load Util
The table that follows identifies the commands comprising the CDM-570L main menu, and the
content section in this manual where explicit information may be referenced, either in this
appendix or in Chapter 5. FRONT PANEL OPERATION:
Menu Branch
(For more info, see...)
Description
Config
(Chapter Sect. 5.2.2.1)
(Appendix Sect. L.3.3.1)
Used to fully configure the modem and the ODU.
Monitor
(Chapter Sect. 5.2.2.2)
(Appendix Sect. L.3.1.3)
Used to monitor the alarm status of the modem and the ODU, to display the
Receive Parameters screen, and to view the log of stored events for the modem
and the ODU.
Test
(Chapter Sect. 5.2.2.3)
Used to invoke one of several test modes (loopbacks, for example).
Info
(Chapter Sect. 5.2.2.4)
(Information) Used to view information on the modem, without having to go
into configuration screens.
Save/Load
(Chapter Sect. 5.2.2.5)
(Save/Load) Used to save and to retrieve up to 10 different modem
configurations.
Util
(Chapter Sect. 5.2.2.6)
(Utility) Used to perform miscellaneous functions, such as setting the Real-time
clock, adjusting the display brightness, etc.
For ODU operation, use the
◄ ► arrow keys to select Config or Monitor, and then press
ENTER.