Comtech EF Data CDM-570 - Manual (Page 363)

CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Appendix D MN/CDM570L.IOM
D–13
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction Code
and Qualifier)
Response to
Query
Tx Carrier State TXO= 1 byte,
value 0 thru 4 Command or Query.
Tx Carrier State, where:
0=OFF due to front panel or remote control command
1=ON
2=RTI (receive/transmit inhibit)
3=OFF due to ext H/W Tx Carrier Off command (not a valid argument when used as
a command)
4=OFF due to BUC warm up delay (not a valid argument in a command format.)
5=RTI (receive/transmit inhibit), timeout = 1 second
6=RTI (receive/transmit inhibit), timeout = 2 seconds
7=RTI (receive/transmit inhibit), timeout = 4 seconds
8=RTI (receive/transmit inhibit), timeout = 7 seconds
Example: TXO=1 (Tx Carrier ON)
TXO=
TXO?
TXO*
TXO# TXO? TXO=x
(see Description of
Arguments)