G.3.4 router modes, G.3.4.1 router mode – point-to-point – Comtech EF Data CDM-570 User Manual

Page 442

Advertising
background image

CDM-570/570L Satellite Modem with Optional IP Module

Revision 12

Appendix G

MN/CDM570L.IOM

G–6

attached to their local Ethernet interfaces and will only send packets over the satellite that are not
destined for the locally attached devices.

G.3.4

Router Modes

G.3.4.1 Router Mode – Point-to-Point




Figure G-2. Router Point-to-Point Working Mode


Figure G-2 shows a 256 kbps Point-to-Point duplex link in Router Mode. For this case:

• Each side of the link has different IP subnets – 10.10.0.0/16 and 10.20.0.0/16.

• Each CDM-570/L-IP has a static route defined for the distant CDM-570/L-IP subnet.

• The Next Hop is automatically defined as Point-to-Point, and there are no HDLC

addresses to configure; all that is required to send traffic between the PCs on each subnet
is to define the local CDM-570/L-IP as the PC default gateway.

• The CDM-570/L-IPs will only pass traffic over the satellite link by the ToSat routes

configured in the Route Table.

Advertising
This manual is related to the following products: