Comtech EF Data CDM-570 - Manual (Page 246)

CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Ethernet IP Module Interface MN/CDM570L.IOM
13–40
13.6.2.4.2 IP | Routes
Figure 13-18. IP | Routes page
Use this page to enter static routes into the IP Module for routing IP traffic over the satellite or to
another device on the local LAN.
Route Table Entry
• Name – String label provided to help users maintain their network. The assigned name
cannot contain any whitespace and must be unique.
• IP Address/Mask – Parameters used to define the route to the destination network.
• Next Hop Address – When the route is of type ToEth, the Next Hop Address is used to
define the locally attached router’s IP address, which can be used to route to the destination
network. This is the case when there is another subnet addressed to the modem on the LAN
side.
• Interface – There are two valid values for routing to a destination network: ToSat and
ToEth:
o ToSat should be selected when the route to the destination network is over the satellite
link. The ToSat routes do not need a Next Hop IP address.
o ToEth should be used when the route to the destination network is attached to the
Ethernet interface.
• 3xDES – When this optional feature is available, set encryption as Enabled or Disabled.