Comtech EF Data CDM-570 - Manual (Page 412)

CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Appendix E MN/CDM570L.IOM
E–26
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction Code
and Qualifier)
Response to
Query
Route Table
(cont.) Note: To be able to set/get the route entries, the system should be in the
routing. It may return RTE!, if system is in Managed Switch mode.
Number of route
entries N/A RTN=3 bytes,
numerical
Query only.
Returns the number of route entries in the route table.
Note: This command should be issued whenever a new route is added/deleted. RTN =
RTN!
RTN? RTN = xxxx
(see description of
arguments)
Delete route entry RTD= RTD=4 bytes,
numerical Command only.
Deletes the route entry at the specified index number, if configured. Returns
RTD!, if there is no route at the index. RTD =
RTD! RTD = xx.xx
(see description of
arguments)
Route Table Get N/A N/A Query only.
Get the whole Routing Table of the modem. Each route entry is separated by ‘\r’
[chr(13)]
The route table will be displayed only if system’s working mode is “Router –
Small, Router-Large, Router-PtP. If the system is in Managed Switch mode, it
may return RCG!
RCG! RCG? RCG=
xxxxxxxxxxxxxx
xxxxxxxxxxxxxx