3 receive hdlc channel addresses page – Comtech EF Data CDM-570 User Manual

Page 291

Advertising
background image

CDM-570/570L Satellite Modem with Optional IP Module

Revision 12

Ethernet IP Module - CLI and Telnet Operation

MN/CDM570L.IOM

14–21

14.2.3.3

Receive HDLC Channel Addresses Page

Activate the Receive HDLC Channel Addresses page from the Satellite/HDLC Interface page.
Use this page to define up to four HDLC addresses that can carry user information on the Satellite
Interface. This page is displayed only when using IP Module V1 Firmware Ver. 1.6.# and earlier
/ IP Module V2 Firmware Ver. 2.1.# and earlier.


Figure 14-13. Receive HDLC Channel Addresses page

The Receive HDLC Channel Addresses page contains the following options/fields:

Selection

Entry Description

HDLC Addr 1 – 4

1 – 4

HDLC address in hex <1 – FFFE, enter = 0001>
Note: HDLC addresses are not used in Point-To-Point Mode.
Small Network Mode (up to 254 addresses) – Limited to valid addresses

between the values of 0x01 and 0xFE.
Large Network Mode (up to 32766 addresses) – Limited to valid

addresses between the values of 0x0001 and 0x7FFF.

Delete HDLC Addr

D

Enter the HDLC entry to delete <1...4>

Advertising
This manual is related to the following products: