Comtech EF Data CDM-570 - Manual (Page 413)

CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Appendix E MN/CDM570L.IOM
E–27
E.5.8 Statistics Commands and Queries
E.5.8.1 WAN Stats
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction Code
and Qualifier)
Response to
Query
WAN TX:
Statistics N/A 10 bytes,
Numerical Query only.
Display all WAN Transmit Statistics. STT!
STT?
Text display of all
WAN/Satellite
Transmit Statistics.
\r =CR = 0x0D
\n = Newline =
0x0A
WAN Tx Error – No Route
WAN Tx Error – Packet Start
WAN Tx Error – Packet Front Length
WAN Tx Error – Packet End Length
WAN Tx Packet Invalid Length
WAN Tx Packet Dropped – Sat Overdriven
WAN Tx HDLC Header Byte Count
WAN Tx HDLC Payload Count
WAN Tx HDLC Packet Count
WAN Tx Utilization
Ethernet Traffic Destined to WAN
Actual Satellite Traffic (kbps)
Percentage of WAN Bandwidth Saved [ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)chr(10)
WAN RX:
Statistics N/A 10 bytes,
Numerical Query only.
Display all WAN Receive Statistics. SRT!
SRT?
Text display of all
WAN/Satellite
Transmit Statistics.
\r =CR = 0x0D
\n = Newline =
0x0A
WAN Rx Bad Address Count
WAN Rx Pkt Proc CRC Errors
WAN Rx Abort/Octet Errors
WAN Rx Overrun Errors
WAN Rx HDLC CRC Errors
WAN Rx HDLC Payload Byte Count
WAN Rx HDLC Header Byte Count
WAN Rx HDLC Packet Count
WAN Rx Invalid FlowID Errors
WAN Rx SAR Re-Assemble Errors
WAN Rx Header Decomp errors
WAN Rx Memory Alignment Errors
WAN Rx Bad CRC Errors [ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)chr(10)
WAN Stats
Clear WSC= 1Byte Numerical Command only.
Setting to ‘1’ clears all the WAN Statistics. Clears both Transmit & Receive Stats. WSC=
N/A WSC=
Clear WAN Stats.