5 compression statistics – Comtech EF Data CDM-570 User Manual

Page 332

Advertising
background image

CDM-570/570L Satellite Modem with Optional IP Module

Revision 12

Ethernet IP Module - CLI and Telnet Operation

MN/CDM570L.IOM

14–62

14.2.11.2.5 Compression Statistics

Activate the Compression Statistics page from the Statistics Menu page. This page displays
counts of the number of bytes before and after for both Header and Payload Compression. For
Header Compression, the percentage of bandwidth savings is displayed. For Payload
Compression, the effective compression ratio is displayed.

Figure 14-43. Compression Statistics page

The Compression Statistics page contains the following options/fields:

Selection

Entry Description

Queue01…08

[RO] Displays statistics in a table format showing:

Pre-Header Comp Bytes
Post-Header Comp Bytes
Header Comp % Savings
Pre-Payload Comp Bytes
Post-Payload Comp Bytes
Payload Compression Ratio

DefQue

Global

All traffic that does not fall within a defined QoS Rule is indicated in the

‘Global’ (Default Rule Queue).

CLEAR

C

Allows a reset of the Statistics of a specific Queue.

ClrAll

A

Resets all Compression Statistics.

ClrDefQ

D

Base [1]

B

View up to 8 different Queues per screen. To allow editing on any of the 32

definable entries, select a base address to control which 8 QoS Queues are

displayed.
For example, if you want to view QoS Queues 16-24, then a Base value of

16 should be defined.

Note: Although the QoS option is not required to use Header or Payload Compression, the
Compression Statistics are displayed by QoS Rule flow Queues. If QoS is not enabled, all the
Compression Statistics will fall within the Global Queue.

Advertising
This manual is related to the following products: