Comtech EF Data CDM-570 - Manual (Page 398)

CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Appendix E MN/CDM570L.IOM
E–12
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to Query
Description of Arguments
Response to
Command
Query
(Instruction Code
and Qualifier)
Response to
Query
Telnet Enabled TLE= 1 byte, value of 0 or
1 Command or Query, where:
0=Disabled
1= Enabled
Enables or disables the telnet interface. When disabled, log in to the telnet
interface is prohibited. TLE =
TLE!
TLE? TLE =x
(see description of
arguments)
SNMP Enabled SPE= 1 byte, value of 0 or
1 Command or Query, where:
0=Disabled
1= Enabled
Enables or disables the SNMP interface. When disabled, use of the SNMP
interface is prohibited. SPE =
SPE! SPE? SPE =x
(see description of
arguments)
Downlink Route All
Multicast DRM= 1 byte, 0 or 1 Command or Query, where:
0=Disabled
1=Enabled
Enable/Disable Downlink Route All Multicast option. DRM=
DRM! DRM? DRM=x
x – 0 or 1.
Transmit DES
enable/disable TDE= 1 byte, value of 0, 1,
2 or 3 Command or Query, where:
0=Disabled
1= Enabled (Managed Switch Only mode)
2= PerRoute (read-only when FAST feature is purchased in router mode)
3 = Unavailable (read-only when FAST feature not purchased)
Acts as command, only in Managed Switch mode. In router mode, it’s read-only.
Enables or disables the Transmit 3xDES feature.
Restriction: Cannot enable if the 3xDES FAST feature has not been purchased TDE =
TDE!
TDE? TDE =x
(see description of
arguments)
TX Header
Compression
enable/disable THE= 1 byte, value of 0, 1,
2 or 3 Command or Query, where:
0=Disabled
1= Enabled (Managed Switch Only mode)
2 = PerRoute (read-only when FAST feature is purchased in router mode)
3 = Unavailable (read-only when FAST feature not purchased)
Acts as command, only in Managed Switch mode. In router mode, it’s read-only.
Enables or disables the Transmit 3xDES feature.
Restriction: Cannot enable if the 3xDES FAST feature has not been purchased THE =
THE!
THE? THE =x
(see description of
arguments)
RX Header
Compression
enable/disable RHE= 1 byte, value of 0, 1,
2 or 3 Command or Query, where:
0=Disabled
1= Enabled
Enables or disables the Transmit 3xDES feature.
Restriction: Cannot enable if the 3xDES FAST feature has not been purchased RHE =
RHE!
RHE? RHE =x
(see description of
arguments)