L.3.3.1 (select:) config (configuration), L.3.3.1.1 config: mask, L.3.3.1.1.1 (config: mask) alarm mask: buc – Comtech EF Data CDM-570 User Manual

Page 497: L.3.3.1.1.2 (config: mask) alarm mask: lnb, L.3.3.1.2 config: odu (outdoor unit), L.3.3.1.2.1 (config: odu (outdoor unit)) buc

Advertising
background image

CDM-570/570L Satellite Modem with Optional IP Module

Revision 12

Appendix L

MN/CDM570L.IOM

L–5

L.3.3.1 (SELECT:) Config (Configuration)

CONFIG: Rem All Tx Rx CEx

Frame Intfc Ref Mask ODU

For ODU operations, use the ◄ ► arrow keys to select Mask or ODU, and then press ENTER.

L.3.3.1.1

CONFIG: Mask

Alarm Mask: Transmit
Receive Ref BUC LNB (◄►)

For ODU operations, use the ◄ ► arrow keys to select BUC or LNB, and then press ENTER.

L.3.3.1.1.1 (CONFIG: Mask) Alarm Mask: BUC

BUC Alarm:
Active Masked (◄ ►,ENT)

Use the ◄ ► arrow keys to select Active or Masked, and then press ENTER. By selecting
Masked, no alarm will be generated.

L.3.3.1.1.2 (CONFIG: Mask) Alarm Mask: LNB

LNB Alarm:
Active Masked (◄ ►,ENT)

Use the ◄ ► arrow keys to select Active or Masked, and then press ENTER. By selecting
Masked, no alarm will be generated.

L.3.3.1.2

CONFIG: ODU (Outdoor Unit)

ODU (Outdoor Unit):

BUC LNB (◄ ►,ENTER)

Use the ◄ ► arrow keys to choose between controlling and monitoring a BUC (Block Up
Converter) or an LNB (Low-Noise Block Down Converter). Press ENTER when done

L.3.3.1.2.1 (CONFIG: ODU (Outdoor Unit)) BUC

BUC: M&C-FSK DC-Power

10MHz Alarm LO Mix (◄ ►)

Use the ◄ ► arrow keys to select M&C-FSK, DC-Power, 10MHz, Alarm, LO, or Mix, and
then press ENTER.

Advertising
This manual is related to the following products: