Comtech EF Data CDM-570 User Manual

Page 369

Advertising
background image

CDM-570/570L Satellite Modem with Optional IP Module

Revision 12

Appendix D

MN/CDM570L.IOM

D–19

Parameter

Type

Command

(Instruction

Code and

Qualifier)

Arguments for

Command or

Response to

Query

Description of Arguments

Response to

Command

Query

(Instruction Code

and Qualifier)

Response to

Query

Clear All Stored
Statistics

CAS=

None

Command only.
Forces the software to clear the software statistics log.
Note: This command takes no arguments.
Example:
CAS=

CAS=
CAS?
CAS*
CAS#

N/A

N/A

G.703 Clock
Extension

CEX

2 byte

Command or Query.
G.703 Clock Extension in the form ab, where:
a=G.703 Clock Extension Mode (0=None; 1=TxLock; 2=RxEnable)
b=G.703 Clock Extension Interface (0=T1; 1=E1Bal; 2=E1Unbal)
Example: CEX=12 (Sets Tx Lock to E1 Unbalanced)
Notes:
1. Not all CEX modes are valid all the time.
2. For argument a:

When Data Interface (ITF) is set to be G.703, Clock Extension Mode is
automatically set to be 0=None. Reply: ITF+
When Tx Clock (TCK) is changed from Internal to Non-Internal, Clock

Extension Mode will be automatically changed to 0=None if it was 1=TxLock.
Reply: TCK+

CEX=
CEX?
CEX*
CEX#

CEX?

CEX=ab
(see Description of
Arguments)

Circuit ID String

CID=

24 bytes

Command or Query.
Sets or queries the user-defined Circuit ID string, which is a fixed length of 24
characters.
Valid characters include: [Space] ( ) * + – , . / 0 thru 9 and A thru Z

CID=
CID?
CID*
CID#

CID?

CID=xxxxxxxxxxxxx
xxxxxxxxxxx
(see Description of
Arguments)

Configuration Load CLD=

1 byte

Command only.
Causes the CDM570L to retrieve a previously stored modem configuration from
Configuration Memory location defined by the one-byte argument (0-9).
Example: CLD=4 (retrieve modem configuration from location 4)

CLD=
CLD?
CLD*
CLD#

N/A

N/A

Configuration Save CST=

1 byte

Command only.
Causes the CDM570L to store the current modem configuration in Configuration
Memory location defined by the one-byte argument (0- 9).
Example: CST=4 (store the current configuration in location 4)

CST=
CST?
CST*
CST#

N/A

N/A

Advertising
This manual is related to the following products: