Fluke Biomedical VT Mobile - Manual (Page 34)

VT MOBILE
Operators Manual
3-10
Press G (Units) to change the units of measure for the Volume Screen. Possible units
of measure for this screen include:
• Liters Liters
• mL Milliliters
• CF Cubic Feet
Press F (Clear) to reset the statistics and start a new reading.
Pressure Screen
Press L to access the Pressure Screen, which displays the reading and statistics for the
pressure signal from the high-pressure or low-pressure/flow port. A sample Pressure
Screen appears below:
ede39s.bmp
Press G (Units) to change the units of measure for the Pressure Screen. Possible units
of measure for this screen include:
• PSIG – Pounds per square inch gauge
• kPa – Kilopascals
• bar – 14.7 PSIG
• mbar – millibar = .001 Bar
• atm – Atmosphere
• inH
2
0 – Inches of water
• inHg – Inches of mercury
• cmH
2
0 – Centimeters of water
• mmHg – Millimeters of mercury
Special Functions Screens
Access the Trend Test, Zero Sensors, Barometric Pressure, and Battery screens with the
keys at the bottom of the keypad.