Fluke Biomedical VT Mobile - Manual (Page 6)

WX Warning. Read before using Analyzer.
To avoid personal injury, follow these guidelines:
ƒ Do not use the VT MOBILE in any manner not specified in the Operator’s
Manual. Otherwise, the protection provided by this product may be impaired.
ƒ When measuring oxygen, always keep all components of test setup well away
from open flame or other combustion-starting devices.
ƒ Use in well-ventilated space. Be aware that a gas defined with VT for Windows
software as ‘User’ may be unknown while using the VT MOBILE.
ƒ For high pressure measurements, always turn off gas source before
connection or disconnection of VT MOBILE. Be aware that there is no pressure
indication on the VT MOBILE screen when VT for Windows software is in
control.
• Always press power off on the VT MOBILE and unplug the battery eliminator
before cleaning the outer surface.
• Inspect the product, if the instrument appears damaged or appears to operate
in a manner not specified in the manual, DO NOT CONTINUE USE. Return the
product for service.
• Avoid spilling liquids on the analyzer; fluid seepage into internal components
creates corrosion and a potential shock hazard. Do not operate the instrument
if internal components are exposed to fluid.
• Do not open this product. There are no user replaceable parts.
W Caution
The VT MOBILE should be calibrated annually. Only qualified technical personnel
should perform troubleshooting and service procedures on the VT MOBILE.
Do not expose the system to temperature extremes. Ambient operating
temperatures should remain between 10 and 40 °C. System performance may be
adversely affected if temperatures fluctuate above or below this range.
Clean only with a damp, lint-free cloth, using a mild detergent, and wipe
down gently.